Power cylinders
The hydraulic power cylinder is designed to perform assembly and disassembly, repair and other types of work in various industries. They can be effectively used when working on horizontal movement of objects, when hydraulic return of the rod allows you to quickly prepare the jack for the next cycle
Peculiarities:
Threaded holes in the base of the cylinder allow the cylinder to be securely attached to the bearing surface, while the female threaded rod allows the cylinder to be attached to various devices
The cylinder is equipped with flexible multi-lip seals and high-strength support-guide rings, allowing the cylinder to operate under significant radial rod loads
A safety valve in the rod end protects the hydraulic cylinder from exceeding the rated pressure when the quick-release coupling halves are loose
The cylinder is equipped with floating bearings allowing to reduce the radial loads on the rod under eccentric loading (except for the TsS20G250GZ model)
The cylinders are powered by pumping stations
If the device you need is not in the catalog, you can order it according to your individual parameters.
You can buy a hydraulic power cylinder in our company at an affordable price in Irkutsk. For more information, just call.
You can order a model with your parameters, if a suitable one is not in our catalog.
| Serie: | CS...G... |
| Capacity: | 10-200 ton |
| Pressure: | 700 bar |
| Stroke retraction: | hydraulic |
| Усиление: | ----------------------- |
| Толкающие: | от 11,3 до 20 тс |
| Тянущее: | от 2,3 до 13 тс |
| -----------------------: | ----------------------- |
| Ход штока: | 250 и 500 мм |
| Основание: | ----------------------- |
| d1: | М10 |
| n: | 2 шт |
| D1: | от 28 до 38 мм |
| -----------------------: | ----------------------- |
